we will be using the 22mm modded with a heaver load
system mounted on a
pneumatic displacement shock absorption rig.
WI-VI
Passive Shadow catching in a urban environment utilizing opportune RF signal input.
You can do this with a smartphone ad a special dongle.
if the target has a cell phone that is on. then no further work is needed.
otherwise
one can use RF spectrum analyzer software to determine signal strength and location of known outputs such as wifi access points & 3g/4g cell towers and treat such as a segmented radar output array. You can then take a baseline of the strength reading of various inputs to determine Geo location of objects within the field from a (moving) single point. this is a passive system..
conditions;
Target must be located in between known RF sources and receiver(s) to pick up targets within the volume (not a problem for walls and furniture)
The telemetric reading accuracy of such a method can be increased by adding multiple receivers sharing known telemetries and signal strengths continuously and correlating the RF data from multiple points in real time. Giving you a larger more accurate picture of the inside of the unknown volume. Utilizing g3/g4 network to communicate this looks like a standard set of phone calls from any observation point.
3d mapping according to RF resistance
It should now then also be possible to map the inside of a unknown volume and its contents by sweeping the outside perimeter with a smart phones with specialized dongles from multiple sides.
This will give you a snapshot of the inside during the sweep.
This will give you a snapshot of the inside during the sweep.
No comments:
Post a Comment